Products
Product Details
PP integrated injection-molded corrosion-resistant barrel body: The entire filter barrel is made of PP material injection molding, compatible with most electroplating and chemical corrosive liquids, standard temperature resistance up to 70°C, acid and alkali resistant, and resistant to aging and cracking. Universal interchangeability of all filter media types: supports filter cartridge cap type, pressure plate type, filter paper type, starfruit filter bag, filter tube type, and standard filter bag, totaling 6 types of filter materials. It can be freely replaced according to the shape of impurities inside the tank, making one machine suitable for various filtration needs. High-pressure custom thickened upper and lower lids: Solid thickened PP lid assemblies can be customized as needed, providing stronger structural pressure resistance, meeting production line high-pressure circulating filtration conditions and preventing barrel cap deformation and leakage. Full coverage of multiple flow specifications: a complete series from low flow rate 15L/min to large flow rate 430L/min, compatible with plating tanks of 0.2~6-7 ton different volumes. Pipeline interfaces are available in both weld and flange types.
Model number | Rated filter flow (L/min) | Adapted to plating tank volume (m³) | Standard filter element specifications | Standard filter paper specifications | Inlet and outlet diameter (inch) | Net weight of the whole machine (KG) | Maximum temperature tolerance (℃) |
HL-1001 | 15 | 0.2 | 10"×1 piece | - | 3/4" | 16 | 70 |
HL-2001 | 30 | 0.3 | 20"×1 piece | - | 3/4" | 18 | 70 |
HL-1004 | 60 | 0.6 | 10"×4 pieces | - | 1" | 29 | 70 |
HL-2004 | 80 | 0.8 | 20"×4 pieces | - | 1" | 35 | 70 |
HL-2006-1 | 150 | 1~2 | 20"×6 pieces | Ø198*40 set | 1-1/2" | 71 | 70 |
HL-2008-1 | 180 | 1.5~2.5 | 20"×8 pieces | Ø234*40 set | 1-1/2" | 78 | 70 |
HL-2008-2 | 220 | 2~3 | 20"×8 pieces | Ø234*40 set | 1-1/2" | 82 | 70 |
HL-2012-2 | 250 | 2.5~4 | 20"×12 pieces | Ø302*40 set | 1-1/2" | 98 | 70 |
HL-2018-3 | 330 | 4~6.5 | 20"×18 pieces | Ø370*40 One set | 2" | 118 | 70 |
HL-3018-3 | 430 | 6~7 | 30"×18 pieces | Ø370*60 set | 2" | 126 | 70 |
💡Selection notes:
ER parameters are calibrated with ambient water and show an actual flow rate attenuation of 10%~20% under high-viscosity, high-impurity liquid conditions. It is recommended to reserve a flow margin for selection.
Standard PP barrels have a maximum operating temperature not exceeding 70°C, and high-temperature chemical solutions can be upgraded to PVDF material barrels;
For highly oxidized and solvent-containing chemicals, it is recommended to use VITON fluororubber seals to extend sealing service life and prevent leakage.
✅ Applicable application scenarios: hardware electroplating industry: nickel, copper, zinc, chrome decorative plating, hard chrome groove circulation filtration to remove solid suspended particles and improve surface finish of workpieces; PCB electronics manufacturing: etching, development, chemical copper deposition, electroplating nickel-gold tank chemical purification to ensure the circuit board surface is free of particle defects; Plastic electroplating industry: ABS plastic electroplating pre-treatment and filtration of impurities during plating processes to reduce pinholes and pitting defects in the coating; Fine chemicals / environmental water treatment: Various acidic and alkaline cleaning liquids and neutralized wastewater circulating and filtration, separating solid impurities for chemical reuse.
✅ Supporting service: Free working condition selection: Matching flow rate models and filter material combinations based on plating tank tonnage, chemical corrosion type, and impurity morphology; Non-standard customization services: thickened high-pressure PP drum lids, PVDF anti-corrosion complete machines, titanium snaps, full fluororubber seals, and custom special flange joints; Original factory after-sales warranty: PP filter barrel full unit warranty, filter elements, filter bags, sealing rings, and other consumables are always in stock, with fast nationwide shipping; On-machine sample support: On-site testing of prototypes can be provided to verify the impurity blocking effect of different filter materials, matching the actual filtration needs of the production line.
