Products
Hennvi HCQ Series External Hybrid Self-Priming Magnetic Pump integrates zero-leakage magnetic transmission with gas-liquid separation self-priming structure, maximum self-priming height of 4 meters, all-stainless steel flow-through components, and no shaft seal to completely eliminate media leakage; It can transport flammable, explosive, toxic, and high-temperature highly corrosive liquids, with flow rates of 3~100m³/h, head rates of 12~80m, and power coverage of 0.37~55kW. It is widely used in industries such as petroleum, chemical, electroplating, pharmaceuticals, and environmental protection, replacing imported chemical pumps to create leak-free, safe production workshops.
Product Details
Magnetic leak-free sealing structureThe outer magnetic steel is directly connected to the motor output shaft, relying on the magnetic field to penetrate the isolation sleeve to drive the internal rotor. The transmission medium is completely enclosed inside the static isolation sleeve, eliminating the traditional mechanical shaft seal structure, solving the problem of shaft seal leakage and dripping from the root, and completely eliminating the risk of corrosive liquid leakage.
4-meter high-efficiency gas-liquid separation self-priming designThe pump body integrates a liquid suction chamber, a liquid storage chamber, and an independent gas-liquid separation chamber. After starting up, the impeller automatically stirs the air and liquid in the pipeline to form a gas-water mixture, which enters the separation chamber to complete the air precipitation. After the air is discharged from the outlet, a vacuum is formed in the pipeline. There is no need for a bottom valve or manual pre-filling of the pump. Underground liquid storage tanks and long-distance ground installations can stabilize liquid suction.
All stainless steel anti-corrosion current componentsThe pump body, impeller, partition, internal magnetic rotor, and isolation sleeve are all made of high-quality stainless steel precision casting. Special anti-corrosion alloy materials can be upgraded for special strong corrosion conditions, which are resistant to corrosion by various acids, alkalis, and organic solvents. One pump can be adapted to a variety of corrosive media, reducing the cost of stocking multiple models.
High temperature resistant permanent magnet assemblyThe whole machine uses new high-temperature resistant permanent magnet steel. The magnetism is stable and does not attenuate under high temperature conditions. It will not cause loss of magnetism, insufficient torque or flow attenuation during long-term continuous operation. The applicable temperature range of the medium covers - 30℃ to 100℃.
High wear-resistant self-lubricating sliding bearing systemShaft sleeves and sliding bearings are made of silicon carbide, graphite, and PTFE wear-resistant materials. Lubricating grooves are reserved inside the bearings, which rely on the transmission medium for self-lubrication. There is no need for a separate external cooling water source, eliminating the need for supporting cooling pipelines, reducing the overall energy consumption and floor space of the equipment, and greatly extending the service life of the bearings.
Direct-connected rear-pull type convenient maintenance structureThe horizontal coaxial direct-coupled integrated design adopts a pull-back disassembly structure. When repairing and replacing the impeller, bearings, and seals, there is no need to disassemble the inlet and outlet flange pipelines. Maintenance can be completed by directly pulling out the internal components backwards. The maintenance time is shortened by 60% without changing the original pipeline layout on site.
Low vibration, low noise and smooth operationThe horizontal base has its own shock-absorbing support structure. The motor and the pump head are directly connected coaxially. It has low power transmission loss, small vibration amplitude of the whole machine, and low operating noise. It is suitable for working conditions with low noise requirements such as closed workshops, laboratories, and factory office areas.
Fully enclosed and pollution-free transportationThe medium is completely enclosed in a stainless steel isolation sleeve without any leakage channels to the outside. When transporting toxic, precious, and volatile liquids, there will be no loss of chemicals or air pollution, creating a clean and leak-free production workshop.
Wide specification power coverageThe power of the whole machine is completely covered from 0.37kW to 55kW. The small flow model is suitable for laboratories and small liquid preparation tanks, and the large flow and high power model is suitable for large-capacity transportation scenarios such as large chemical reactors, wastewater treatment stations, and exhaust gas scrubbers.
serial number | Part name | Material and function | Maintenance Features |
1 | Self-priming pump body | Stainless steel casting, integrated liquid suction chamber, liquid storage chamber, and gas-liquid separation chamber to complete the gas-water separation self-priming process | Integrated molding, no splicing leakage, internal crystal impurities can be disassembled and washed separately |
2 | Impeller | Stainless steel precision casting, optimized hydraulic flow path, increased flow head and reduced hydraulic loss | No screw locking, back-pull structure can be quickly removed and replaced |
3 | Partition / static ring | stainless steel + wear-resistant bushing, isolates the liquid storage chamber and the magnetic transmission chamber, and auxiliary medium lubricates the bearings | Wear-resistant and resistant to particle impurities, no need to replace the whole machine when replaced individually after wear |
4 | Shaft sleeve, seal | Silicon carbide / graphite / PTFE composite material, built-in lubrication groove | The medium is self-lubricating, no external cooling water source is required |
5 | Inner rotor assembly | Stainless steel-coated permanent magnets rotate synchronously with the impeller to transmit torque. | Completely immerse the medium, isolate the motor from the isolation sleeve, and prevent the medium from contacting the motor. |
6 | Isolation sleeve | Thin-walled stainless steel closed sleeve, isolates the chemical liquid from the motor magnetic field, static sealing without leakage | No dynamic friction, no problem of shaft seal wear and leakage |
7 | Outer rotor assembly | Permanent magnet, directly connected to the motor output shaft, drives the inner rotor through magnetic field coupling | Coaxial direct connection structure, low transmission loss and high efficiency |
8 | Connecting frame, base | Carbon steel with anti-corrosion spraying, integrally supporting the motor and pump head, with standard mounting holes reserved | Universal mounting base, suitable for national standard motors, easy to replace on site |
9 | Drive motor | Standard industrial three-phase motor,220/380V optional, explosion-proof motor can be customized | Power 0.37~55kW full coverage, explosion-proof model suitable for flammable and explosive media working conditions |
Model | Import and export DN(mm) | Rated flow(m³/h) | Rated lift(m) | NPSHNPSHr(m) | Supporting power(kW) | Speed(r/min) | Voltage(V) |
HCQ20-15-110 | DN20/DN15 | 3 | 12 | 6 | 0.37 | 2900 | 220/380 |
HCQ25-20-115 | DN25/DN20 | 5.4 | 15 | 6 | 1.1 | 2900 | 220/380 |
HCQ32-25-115 | DN32/DN25 | 6.6 | 15 | 5.5 | 1.1 | 2900 | 380 |
HCQ32-25-145 | DN32/DN25 | 4.8 | 25 | 5.0 | 2.2 | 2900 | 380 |
HCQ40-32-132 | DN40/DN32 | 10.8 | 20 | 4 | 2.2 | 2900 | 380 |
HCQ40-32-160 | DN40/DN32 | 14.4 | 32 | 4 | 4 | 2900 | 380 |
HCQ50-40-145 | DN50/DN40 | 13.2 | 25 | 4 | 4 | 2900 | 380 |
HCQ50-40-160 | DN50/DN40 | 15.8 | 32 | 4 | 5.5 | 2900 | 380 |
HCQ50-32-200 | DN50/DN32 | 16.8 | 50 | 4 | 7.5 | 2900 | 380 |
HCQ65-50-125 New | DN65/DN50 | 25 | 20 | 4 | 5.5 | 2900 | 380 |
HCQ65-50-145 | DN65/DN50 | 26.8 | 25 | 4 | 5.5 | 2900 | 380 |
HCQ65-50-160 | DN65/DN50 | 27 | 32 | 4 | 7.5 | 2900 | 380 |
HCQ65-40-200 | DN65/DN40 | 25 | 50 | 4 | 7.5 | 2900 | 380 |
HCQ80-65-125 | DN80/DN65 | 40 | 25 | 4 | 15 | 2900 | 380 |
HCQ80-65-160 | DN80/DN65 | 50 | 32 | 4 | 22 | 2900 | 380 |
HCQ80-65-200 | DN80/DN65 | 80 | 50 | 4 | 37 | 2900 | 380 |
HCQ100-80-125 | DN100/DN80 | 100 | 32 | 4 | 22 | 2900 | 380 |
HCQ100-80-160 | DN100/DN80 | 100 | 50 | 4 | 37 | 2900 | 380 |
HCQ100-65-200 | DN100/DN65 | 100 | 80 | 4 | 55 | 2900 | 380 |
The standard design pressure of the whole machine is 1.6MPa, and the applicable medium temperature range is - 30℃ to 100℃; the standard self-priming height can reach 4 meters; if the specific gravity of the conveyed medium is greater than 1.3g/cm³, it must be stated in advance when ordering, and the factory customizes the increased torque magnetic steel components; the whole series can be equipped with three types of supporting monitoring devices: anti-air operation protection, leakage online monitoring, and medium temperature measurement.
is used for the closed circulation transportation of gasoline, diesel, various organic solvents, and high-temperature reaction liquids. High-power models with explosion-proof motors are preferred; the magnetic leakage-proof explosion-proof structure completely eliminates safety hazards such as volatilization of flammable and explosive media and static electricity fires. It is suitable for reactor circulation and raw material storage tank transfer processes.
transports etching liquid, chromic acid, electroplating brightening additives, and neutralizing acid and alkali liquids, using small and medium flow specifications from HCQ20 to HCQ65; all stainless steel materials are resistant to strong acid and alkali corrosion, and the 4-meter self-priming capacity can directly extract liquids from underground chemical storage tanks. The whole machine is installed on the ground without being immersed in the chemical tanks, simplifying the layout of production line pipelines.
transports sterile medicinal liquids, organic solvents, catalysts, and chemical intermediates. 316L stainless steel flow parts can be customized, and HCQ20 and HCQ25 small flow models can be selected; the shaft seal-less structure will not produce metal ions to precipitate, ensuring the purity of the pharmaceutical medium, and the whole process of sealed transportation is pollution-free.
is used for long-distance lifting and transportation of acid-base comprehensive wastewater, washing neutralization liquid, and flocculation reagents. It adopts HCQ65 and HCQ80 large-flow self-priming models; it can directly extract the medium from underground wastewater pools without installing a bottom valve. The self-priming is stable and suitable for unattended fully automatic environmental protection equipment.
is used to transport printing and dyeing dyes, papermaking acid and alkali cooking liquids, and bleaching agents. It adopts HCQ40 to HCQ80 general stainless steel models; the wear-resistant impeller can withstand trace fibers and suspended impurities, and the self-priming structure reduces pipeline accessories and reduces the purchase cost of the entire equipment.
To transport toxic reagents and highly corrosive valuable chemicals, HCQ20 and HCQ25 small models are selected, equipped with leakage monitoring devices; the whole machine delivers zero-leakage and sealed transportation to avoid the volatilization of toxic chemicals and endangering the personal safety of operators.
Medium specific gravity specification: The standard factory model is only suitable for liquids with a specific gravity ≤1.3g/cm³. If the specific gravity of the liquid exceeds this value, it must be informed at the ordering stage and high-torque reinforced magnets can be customized to prevent the magnets from decoupling and idling to burn the motor.
Media particle restrictions: This machine is strictly prohibited from transporting media containing hard particles and a large amount of crystallized precipitates. The solid particles will quickly wear the sliding bearings and isolation sleeves, causing sealing failure and liquid leakage.
Idling operation is prohibited: Before starting the pump, it must be ensured that the inside of the pump cavity is completely filled with liquid, and dry running without medium is absolutely prohibited; in the idling state, the bearings are not lubricated by medium, and the isolation sleeve will be worn through in a short period of time, causing leakage accidents of corrosive media.
Medium temperature distinction: Standard model adapts to normal temperature medium of 30℃~100℃; if the medium temperature exceeds 100℃, a separate custom-made high-temperature resistant magnetic steel and fluororubber sealing kit is required. High temperature will permanently reduce the magnetism of the permanent magnet, causing a significant attenuation of flow and lift.
Explosion-proof working conditions requirements: When transporting flammable and explosive organic solvents such as gasoline, acetone, and xylene, the entire machine must be equipped with an explosion-proof three-phase motor; ordinary motor wiring and heat dissipation do not have explosion-proof protection structures, which poses major safety risks of fire and explosion.
Free working condition professional selection service: According to the customer's chemical liquid corrosion composition, medium temperature, specific gravity, required conveying flow rate and vertical lift, matching the adapted model, motor power, explosion-proof configuration and monitoring accessory set, and simultaneously providing flow and lift performance curves, CAD installation dimension drawings of the complete machine, and material corrosion resistance comparison tables. Non-standard customization services: Support customization of 316L and titanium alloy current-flow components. Explosion-proof complete machines, high-temperature special magnets, and a full set of PTFE anti-corrosion seals can be produced on demand; leakage monitoring, temperature measurement, and anti-idling protection devices can be installed. Customized drawings and formal quotations will be issued within 7 working days. Original machine warranty service: The drive motor, stainless steel pump body, and magnetic transmission assembly enjoy the complete machine warranty; wearing consumables such as bearings, bushings, isolation sleeves, seals, etc. are always in stock, with 48-hour fast delivery from multiple warehouses across the country, and online remote video guidance for on-site maintenance. On-machine sample testing support: Prototypes can be sent to the customer's production site to test the self-priming height, actual flow head, and explosion-proof sealed conveying effect on the spot. Verify the match with the production line working conditions on the spot. After the test meets the standards, purchase in batches to avoid production losses and safety risks caused by incorrect selection.
HCQ self-priming magnetic pump + activated carbon filter unit｜PCB etching, electroplating liquid long-distance circulation purification complete set of equipment HCQ explosion-proof magnetic pump + chemical reactor circulation system｜organic solvents, flammable and explosive chemical raw materials closed transportation cycle HCQ large flow self-priming pump + integrated wastewater treatment equipment｜underground acid-base wastewater pool lifting, neutralizing agent automatic transportation HCQ Small stainless steel magnetic pump + pharmaceutical liquid preparation reaction tank｜Precise closed circulation transportation of sterile agents and fine catalysts
